EFTA01224878.txt

"C•CURE and Software House are registered trademarks of Tyco Security Products"

"C•CURE and Software House are registered trademarks of Tyco Security Products"

"The C•CURE 9000 C•CURE ID User Guide is for new and experienced security system users who want to learn to use C•CURE ID"

"C•CURE 9000 C•CURE ID User Guide"

"a Fargo HDP 5000 printer that is equipped with an OMINKEY CardMan 5x25 encoder"

"C•CURE ID is a photo badging system that provides imaging and badging technology for Software House Security Management Systems"

"Configuring a Topaz Tablet as the Capture Device... Once the Topaz Tablet is configured in C•CURE ID Setup"

"Configuring a Penware Tablet as the Capture Device... from the Capture Device drop-down list, choose Penware Sig Tablet"

"Card readers that are sold by Software House for use with C•CURE 9000 for access control"

"For the Software House Wedge, select the Comm Port to which the device is connected."

"You can use the Expression Builder from the following panels when: Adding Text to a Badge on Page 141 using the C•CURE ID Text Properties Panel."

"the Co CURE ID Batch Print Manager opens. See Figure 58 on Page 244."

"C•CURE 9000 C•CURE ID User Guide"

"For a MIFARE card that is programmed and locked when purchased, you can read the card information into C•CURE ID"

"Smart Card Programming and Enrollment is supported for the following card types: ... iCLASS"

"Smart Card Programming and Enrollment is supported for the following card types: ... DESFire"

"Software House includes a license information document with your software. Ensure that you have the license information document for C•CURE ID"

"templates that come with C•CURE ID: SWH Enroll MIFARE with MIFARE Key"

"C•CURE 9000 C•CURE ID User Guide"

"Perform the following steps to configure Mag Encoding Options for C•CURE 800/8000 access control: 1. Open the C•CURE ID Badge Designer"

"When you select Penware Sig Tablet or Topaz Sig Tablet as the capture device for signatures, you can use the signature tablet to take badge signatures"

"When you select Penware Sig Tablet or Topaz Sig Tablet as the capture device for signatures, you can use the signature tablet to take badge signatures"

"If you have a Bioscrypt enrollment center, follow this procedure to enroll a fingerprint: 1. Click Take Fingerprint. The Bioscrypt Fingerprint Capture"

"This drop-down list includes all the Avery Label Templates that are included with C•CURE ID"

"If you are using the WatchportN USB Digital Camera, select TWAIN as your device. C•CURE ID supports the TWAIN interface"

"C•CURE 9000 C•CURE ID User Guide"

"C•CURE 9000 C•CURE ID User Guide"

"C•CURE 9000 C•CURE ID User Guide"

"Magnetic Encoding with Eltron Printers... your badge design works as intended with your badge printer"

"The Nisca printer default Encoder text string prefix and suffix configured on the C•CURE ID Magnetic Encoding dialog"

"To perform Smart Card programming and enrollment with a Magicard, Nisca, or Fargo printer connected to a C•CURE 9000 Client"

"Software House recommends the following formula... C•CURE 9000 C•CURE ID User Guide"

"C: \ Program Files \ Software House \ SWHSystem Badging"

"export the encrypted key to a file for later use (for example, to buy programmed cards from Software House)"

"If you are using Software House readers, you can select Smart Frame... proprietary technology only supported on the Software House readers."

"You can use the Wasp family of bar codes that are available as part of the C•CURE ID product"

"C•CURE ID is an optional software product for Software House Security Management Systems"

"Fargo HDP5000 Badge Printer"

"Fargo DTC400e Badge Printer"

"This PDF file directs you to the OMNIKEY link at HID Global"

"This .doc file is used if you order pre-programmed cards from Software House, or if you order program cards from Software House to program your Smart "